Chinese VersionChina Suppliers > JIANGSU LIANLIAN CHEMICAL CO.,LTD > Predispersed Rubber Chemicals NOBS-80
- Search Product
-
-
- Region :China/Jiangsu
- Tel : +86-518-81592922
- Fax : +86-518-81592911
- Email :export@lianlianchem.com
- URL :www.chemnet.com/ChinaSuppliers/15716/
- Add :Lianyungang City Tong Guan Road 87 Weihai International Commercial Affairs Building, room 1208
- Details for Predispersed Rubber Chemicals NOBS-80
-
Predispersed Rubber Chemicals NOBS-80
Category : Catalyst and Auxiliary/Rubber Auxiliary Agent
CAS NO : EC NO : MF : MW : Packing : 25 kg Product description : Detailed Product Description Manufacturer experienced,Stable , continuable,environmental ISO9001,ISO14001,REACH pre-register.Powder,Granular,Masterbatch HiDispersion Predispersed Rubber Chemicals NOBS-80 Aaccelerator for the vulcanization of natural and diene synthetic rubbers Product description Composition 80% dibenzothiazyl disulphide 20% EPDM/EVA binder and dispersing agents Appearance Off-white to beige granules Density,20 oC Approx. ~ 1.26 g/cm3 (20oC) Physiological properties : See safety data sheet (MSDS) Raw material characteristics of TBBS: Melting point ~ 78 oC Evaporation loss ≤ 0.5 % TBBS content ≥ 95% Free amine ≤ 0.5 % Ash content ≤ 0.5 % Use Characteristics The curing accelerator HiDispersion NOBS-80 causes a considerably long scorch time, great processing safety and a fast full cure. HiDispersion NOBS -80 is used as primary accelerator for the low sulphur vulcanization or in combination with dithiocarbamate and thiuram accelerators. The vulcanizates obtained provide good ageing resistance and compression set. The scorch times of mixes containing HiDispersion NOBS -80 in combination with thiuram and dithiocarbamate accelerators are noticeably reduced. Combinations of HiDispersion NOBS -80 and HiDispersion TMTM-80 have proved particulary favourable. They cause very short total curing times - though the mixes have good scorch resistance and a very high degree of crosslinking, even in relatively small amounts. Thiourea derivatives have strong secondary acceleration effects on HiDispersion NOBS -80, especially in mixes containing small amounts of sulphur. In mixes that are accelerated with mercaptanes and thiurams, HiDispersion NOBS -80 may reduce the onset of cure. Processing Advantages The thermoplastic, excellent compatible EPDM/EVA binder which is combined with active dispersing promoters allows much more easily and quickly incorporation and excellent dispersion in the rubber mixing. In this way, optimal activity of the effective NOBS is assured. Dosage levels NR: primary: 0.8 - 1.2 phr with 2.5 - 4 phr sulphur secondary: 0.05 - 0.4 phr with 1-1.5 phr mercapto accelerator and 1.5-3 phr sulphur; SBR: 0.1 - 0.4 phr with 1 - 1.5 phr mercapto accelerator and 1.5 - 2.5 phr sulphur; NBR: 0.05 - 0.4 phr with 1.5 - 2.4 phr sulphur and 0.8 - 1.5 phr sulphenamide accelerator. Applications Tire treads, carcasses, conveyor belts, floor coverings, footwear, cable insulations. Packing Net 25 kg cartons with plastic inner. Storage stability In original closed containers under cool and dry conditions max. 2 years. Handling Consult material safety data sheet (MSDS) for additional handling information. Uses : rubber products Synonyms : no data
- Inquire
-
Predispersed Rubber Chemicals NOBS-80