Typical Properties： Fluorine Content 65.9% Specific Gravity 1.82 Physical form SlabColor Off-white SolubilityKetones and EstersMooney Viscosity ML 1+10@ 121ºC 47 Instruction： WF562E is a fluoroelastomer precompound which include copolymer of hexafluoropropylene and vinylidene fluoride, curatives.It is designed for compression molding product such as O-ring and Gasket. Features of WF562E are: 1.Excellent mold release 2.Excellent compression set resistance 3.Good mold flowRecommended Processing Procedures： WF562E can be compounded with internal mixers or two-roll mills with standard fillers and other ingredients that are used in typical fluoroelastomer formulations. All the dry ingredients should be blended before adding to the rubbery solid. During compounding, full cooling should be accompanied. After mixing, the compound should be cooled as quickly as possible. Packing information： WF562E is package with PE film in carton. The weight is 20kg net per carton. Safety and handling： 1.Store in well ventilated place 2.Smoking is forbidden Strictly in working areas 3.Avoid eye contact 4.Wash thoroughly any contacted skin and clothing After handling. 5.Further safety and handing guide, can follow the product’s Material Safety Data Sheet.